Vibration Motor 230V, 4-Pole, Single-Phase, Unbalance Motor, External Vibrator 1500 rpm
Couldn't load pickup availability
SINGLE-PHASE FOOT-MOUNTED VIBRATION MOTORS
Single-phase, foot-mounted vibration motors with a maximum centrifugal force of 500 kgf (4.9 kN) are suitable for vibration machine manufacturers and other industrial sectors.
Miksan Motor's single-phase, foot-mounted vibration motors can operate at high power in all configurations and environments.
TECHNICAL SPECIFICATIONS
Power supply
The vibration motors are powered by 230 volts and 50-60 Hz as standard. Please contact us for the special voltage and frequency tariff.
electric motor
Single-phase vibration motors have higher starting torques than single-phase asynchronous motors. Standard Miksan Motor's single-phase vibration motors feature a permanently split capacitor. The design takes into account the problem of overheating, as there is no ventilation system.
polarity
Standard vibration motors are manufactured in 2- or 4-pole versions
Motor shaft
The motor shaft of the vibration motors is made of C45 structural steel.
rotor
The rotor is manufactured by injecting high-alloy aluminum into the channel of the packed silicon sheet.
warehouse
The single-phase vibration motors are equipped with deep groove ball bearings (2Z) with C3 bearing clearance.
Eccentric weights
Depending on the type of vibration motor, the weights can be easily adjusted by turning or pulling them out.
Housing
The housing of the vibration motor is made of high-alloy aluminum.
Cover for eccentric weights
The cover for the eccentric weights of the single-phase vibration motor is made of sheet metal. The purpose of the eccentric weight covers is to protect the eccentric weights from external influences and ensure safety.
Insulation class
The insulation class of our standard vibration motor is F-Class (155 °C).
Strength of protection
The protection class is IP 66.
lubrication
Our single-phase vibration motors are equipped with self-lubricating bearings (deep groove ball bearings), so lubrication is not required.
painting
Vibration motors are painted with the color RAL 1003 using the electrostatic painting process